SingStar Pop Vol. 2 on PS2: What You Need to Play

Quick answer

To play SingStar Pop Vol. 2 on PS2, you need the game disc, a PlayStation 2 console, and at least one SingStar-compatible USB microphone. Connect the microphone before launching the game, then follow the on-screen prompts to pick a song and start singing.

Why the right microphone matters

SingStar is built around USB microphones, not the standard PS2 controller. The game uses the microphone input to detect pitch and volume, so a generic controller or a non-USB mic will not work. You need a wired USB microphone that the PS2 recognizes as an audio device. Most official SingStar microphones are plug-and-play, but some third-party mics may require a specific controller port or adapter. Check that your microphone has a USB connector and is labeled for PlayStation 2 or SingStar use. If you are buying a used copy of the game, remember that the disc alone does not include a microphone unless the listing says so.

Disc-only copies and what to expect

Many used PS2 games, including SingStar Pop Vol. 2, are sold as disc-only. That means you get the game disc but no original case, manual, or microphone. The disc should be clean and tested, but you will need to supply your own microphone and controller. If you already own a SingStar mic from another version, it will work with this game. If not, factor the cost of a compatible microphone into your purchase. Also note that the game is region-locked for NTSC (North America), so it will only run on a North American PS2 console.

One or two players? Plan your setup

SingStar Pop Vol. 2 supports up to two microphones for duets or competitive play. If you plan to play with a friend, you will need two USB microphones or a single microphone plus a second controller if the game allows controller input for menu navigation. The game menus are navigated with a standard PS2 controller, so keep one connected even when using microphones. For solo play, one microphone is enough. Make sure your PS2 has enough free USB ports; the original PS2 has two USB ports on the front, so two microphones will use both. If you need more ports, a USB hub may work, but check that it is compatible with the PS2 before relying on it.

Step-by-step setup for SingStar Pop Vol. 2

1. Check your console and region: Confirm your PS2 is an NTSC (North America) model, because this game is region-locked. Plug the console into a TV and power it on with a standard controller connected. A PAL or Japanese console will not play this disc.
2. Connect the microphone(s): Plug a SingStar-compatible USB microphone into one of the PS2's front USB ports. If you are playing with two singers, connect a second microphone to the other port. The PS2 should recognize the mic automatically; if not, try a different USB port.
3. Insert the game disc: Open the disc tray, place the SingStar Pop Vol. 2 disc label-side up, and close the tray. The game should start automatically. If the game does not load, check that the disc is clean and free of scratches.
4. Navigate the menu with the controller: Use the PS2 controller to move through the game's menus and select a song. The microphone is only for singing, not for menu navigation. Keep the controller connected even after you start singing.
5. Adjust microphone volume and start singing: Follow the on-screen prompts to test your microphone level. Sing or speak into the mic to see if the input meter moves. Adjust the volume on your TV or sound system as needed. If the meter does not move, the microphone may not be compatible or properly connected.

Product facts

• SingStar Pop Vol. 2 - PS2 Game: SingStar Pop Vol. 2 is a used, disc-only PS2 game that is fully cleaned and tested. You get a working game disc, but you must already own or buy a compatible microphone and controller to play.